Cylindrical parts with consistent dimensions, from prototypes to production runs.
Capability: Up to 1000 mm between centers
Services
From CNC turning to EDM, these are some of the processes we use to make your parts. Choose a service to request a quote, or send us your drawing and we will help you find the right option.
Precision machining
Turning
Turned parts, such as shafts, bushings and flanges.
Long or large-diameter parts, and one-off jobs.
Capability: 1000 to 3000 mm long, up to 40" swing
Milling
Prismatic parts, pockets, slots and holes.
Machining-center milling for prismatic parts and pockets.
Capability: Up to 800 mm × 400 mm
Manual milling for one-off parts, adjustments and rework.
EDM
Cutting with electrical discharges, with no cutting force on the part.
Cavities and internal shapes made with an electrode, even in hardened steel.
Grinding
The final size of shafts and flat surfaces, even after hardening.
Outside diameters ground to close tolerances and a fine finish.
Flat, parallel surfaces ground to close tolerances and a fine finish.
Engraving and design
We mark your parts and develop the drawings needed to make them.
Marking parts in steel, aluminum, bronze, brass and engineering plastics.
Drawings and models developed so your part can be made.
Additional services
Complementary processes, so your part arrives finished without looking for another supplier.
Coatings that protect the part and give it its final finish.
- Zinc plating
- Black oxide
- Sandblasting
- Anodizing
An even, corrosion-resistant powder coat.
Heat treatment that hardens steel; in a vacuum, without oxidizing the surface.
Welded joints for parts and assemblies.
- SMAW
- TIG
- MIG
Profiles cut from sheet and plate metal, with clean edges.
Digitizing existing parts to get their 3D model.
Get a quote for your part
Send us your drawing or describe the part you need. We will reply with the price and lead time.