About us
We are a high-precision machine shop that combines CNC and manual machines to choose the right process for every part.
- Location
- Querétaro, Mexico
- Experience
- More than 10 years
- Membership
- Member of COPARMEX
Mission
To make the parts our customers need, to the specifications on their drawings and by the agreed date, with direct attention from quote to delivery.
Vision
To be the precision machine shop the most demanding industries trust, known for the quality of every part and for keeping our commitments.
Industries
We work with companies in sectors where an out-of-tolerance part can stop a production line or compromise an assembly.
Hub flange with wheel stud holes Automotive
Rib with lightening holes Aerospace and aeronautics
Gripper finger with holes and a slot Automation integration
Stepped vise jaw Manufacturing
Finned heat sink Electronics and technology
Mold insert for a cap Cosmetics
Pump impeller Energy
Your drawing Don't see your industry?
We can make your part too. Send us your drawing
From drawing to part
- 1
Drawing
Share your drawing or model with us. If you don't have one yet, we can help you develop it in 2D or 3D.
- 2
Programming
We prepare the process sheet with the operations, tools and CNC program needed to make your part.
- 3
Machining
We optimize machining times and choose the right tool for each material.
- 4
Inspection
We check each part's dimensions and fits against the drawing before releasing it for delivery.
- 5
Engraving
We engrave the part number on your part at no extra cost. Restrictions apply.
- 6
Delivery
We pack the part properly for transport and deliver it to your plant on the agreed date.
| 10 | Side A: face and turn Ø60 and Ø90CNMG (roughing) and VNMG (finishing) inserts | CNC lathe |
| 20 | Side A: drill and bore Ø20 H7Ø18 drill and boring bar | CNC lathe |
| 30 | Flip, side B: face to 440, turn Ø40 h7 and Ø30CNMG and VNMG inserts | CNC lathe |
| 40 | Side B: thread M30 × 1.51.5 pitch threading insert | CNC lathe |
| 50 | Dimensional inspectionMicrometers and go/no-go gauges | Quality |
| 60 | Part number engraving | Laser |
O0020 (7700-A12 SIDE B)
T0101 (ROUGHING)
G50 S2500
G96 S200 M03
G71 U2.0 R0.5
G71 P10 Q20 U0.4 W0.1 F0.25
T0303 (THREAD M30X1.5)
G97 S800 M03
G76 P010060 Q100 R0.05
G76 X28.16 Z-88.0 P920 Q300 F1.5| Op. | Operation and tool | Machine |
|---|---|---|
| 10 | Side A: face and turn Ø60 and Ø90CNMG (roughing) and VNMG (finishing) inserts | CNC lathe |
| 20 | Side A: drill and bore Ø20 H7Ø18 drill and boring bar | CNC lathe |
| 30 | Flip, side B: face to 440, turn Ø40 h7 and Ø30CNMG and VNMG inserts | CNC lathe |
| 40 | Side B: thread M30 × 1.51.5 pitch threading insert | CNC lathe |
| 50 | Dimensional inspectionMicrometers and go/no-go gauges | Quality |
| 60 | Part number engraving | Laser |
O0020 (7700-A12 SIDE B)
T0101 (ROUGHING)
G50 S2500
G96 S200 M03
G71 U2.0 R0.5
G71 P10 Q20 U0.4 W0.1 F0.25
T0303 (THREAD M30X1.5)
G97 S800 M03
G76 P010060 Q100 R0.05
G76 X28.16 Z-88.0 P920 Q300 F1.5In the shop
See our work: from machining on machining centers, lathes and manual mills to the inspection of every part before it ships.
Materials
Choose a material to see its reference finish and request a quote.
Services
CNC turning
Cylindrical parts with consistent dimensions, from prototypes to production runs.Up to 1000 mm between centersManual turning
Long or large-diameter parts, and one-off jobs.1000 to 3000 mm long, up to 40" swingCNC milling
Machining-center milling for prismatic parts and pockets.Up to 800 mm × 400 mmWire EDM
Complex profiles cut in hardened materials.Up to 6" cutting heightCylindrical grinding
Outside diameters ground to close tolerances and a fine finish.To your drawing2D/3D design
Drawings and models developed so your part can be made.To your drawing
Quality policy
Over 98% of parts accepted
Our internal quality policy backs every delivery and keeps the rejection rate below 2%. If a part does not meet the specifications, we address it right away to find a solution.
Within tolerance
Why LOAN?
Attention to detail
We take care of every detail on your drawing, from tolerances to finishes.
Real lead times
We only promise dates we can meet.
Inspection at every stage
We check dimensions during machining, not only at the end, as part of our standard quality control (SQC).
Machines in top condition
We maintain our equipment constantly so every part comes out within tolerance.
Ongoing training for our team
Training our team helps us make conforming parts right the first time.
Request a quote
Tell us what part you need. If you have the drawing, attach it to help us prepare your quote.
- +52 442 779 8949
Monday to Friday, 8:00 a.m. to 6:00 p.m. (Mexico City time)
We'll reply within 24 business hours.